AAC hydraulic finished production clamp AAC Block Packing Machine /
Finished product hoisting tool (see attached drawing) is a
supporting component in the autoclave aerated concrete packing
line. Its tightening is done by a clamping arm set. It is a special
hosting tool with the function of delivering steam-cured concrete
blocks coming out of autoclave to the finished product line or to
be loaded on trucks or to be packed.
a) Its function is to deliver steam-cured concrete blocks to the
finished product line or to be loaded on trucks or to be packed.
2. Major technical specifications
a) Maximum overall dimensions:
5444 mm (length) × 1010 mm (width) × 3733 mm (height)
b) Mass: 3291.2 kg
This finished product hoisting tool is made up of the following
parts; beam, clamping arm set, top beam, bottom beam, guide shaft,
connecting rod, shaft, etc.
Both the top and bottom beams are made of steel channels and
plates. They feature good rigidity, simple structure, easy mounting
and convenient adjustment.
The clamping arm is controlled by a hydraulic cylinder.
The sling on the overhead crane lifts up the shaft connected with
the top beam so that the top beam moves up along the guide frame.
The clamping arm is controlled by the hydraulic cylinder so that it
can do clamping and loosening and complete the motion of clamping
the concrete block.
Mount the clamping arm set with the top beam and the hydraulic
6. Trial lifting and adjustment:
After assembling the top beam and the clamping arm on site, connect
the crane sling with the pulley. Move the crane sling up and down
and the clamping arm should be able to do clamping and loosening
freely and balancedly without jamming or swinging to and fro.
Do not anybody to stand under the hoisting tool in times of