Automatic AAC Sand Lime panel Machine Lightweight Wall Panel
Machine AAC Slab
What is AAC slab/AAC panel:
AAC (Autoclaved Aerated Concrete) panel/slab is also called ALC
(Autoclaved Lightweight Concrete) panel, which is steel mesh
reinforced, lightweight and loadbearing. AAC slab can be used as
external wall panel (exterior wall panel), internal wall panel
(interior wall panel), partition wall panel, flooring, roofing,
fence, cladding, curtain wall and facade etc. This kind of new
building material has been well used in various kinds of buildings,
such as public facilities, industrial constructions, civil housing,
hospitals, hotels, apartments, villas, schools, stores,
The AAC slab can replace traditional precast concrete and clay
bricks very well. Also the panels can easily cut, drilled, screwed
when installing with fast speed due lightweight and precast.
Introduction of AAC panel machine
Autoclaved Aerated Concrete ( AAC panel machine) panel s have
become the pillar industry in construction field. China has
introduced AAC technology before 40 years, our company is the
earliest manufacture and R&D institute of Aerated Concrete
(AAC) machinery, and our technology has reached the advanced level
of Aerated Concrete (AAC) machine industry. The sales volume and
comprehensive indexes of our Aerated Concrete (AAC) equipment are
ahead of others in China.
Advantages of AAC block machine
The AAC panel machine (i.e. aeroconcrete) is characterized by the
advantages of light weight, heat preservation, sound isolation,
high strength,processable property and so on, what’s more, the raw
materials of AAC are abundant. Especially, it can not only make use
of industrial waste residue, improve environmental pollution, and
protect tillable field, but also create favorable social and
economic benefits to take fly ash as the raw material of AAC panel.
Aerated concrete (i.e. aeroconcrete) is the perfect wall material
to replace the traditional solid clay brick. For many years,
Aerated Concrete (AAC) has always accepted strong supports from the
policies about reforming of wall material, tax policies and
environment protection policies. Aeroconcrete (AAC) block and panel
have become the important part of new-type construction materials,
and possess bright development future.
AAC Production Line (autoclaved aerated concrete plant) Process
1. The raw materials store in the material storehouse (or stores
the pot ) after dealing with reservly such as the lime , cement ,
gypsum , sand (or fly ash ).
2.Aluminium powder or the aluminium lotion is through dealing with
the reserve material for use.
3. Raw materials measure according to certain matching by electron
balance measure , aluminium powder , water put into aluminium
powder mixer is it is it suspend the liquid to make to mix after
4. The batching water (cold water or hot water pitcher hot water )
is measured by the electronic water balance .
5. Put into and pour among the mixers in certain order after , raw
materials , aluminium powder suspend the liquid is measured, pour
and enter the mould after mixing evenly (panel should be put
network slice of reinforcing bar in advance in the mould).
6. Quiet to is it raise in advance to park through certain
temperature and time, is it transport to the cutting machine to
hang from upset hoist upset 90o after the base body reaches certain
intensity, the drawing of patterns is cut. a.The base body carries
on the side and cuts and mills the trough vertically at first.
b.Then carry on the vertical level to cut. c.Cut horizontally
finally. d.Cut good base body is it raise to cauldron car go on one
yard of shelves organize into groups to steam to transport to hang
to drive a vehicle to load.
7. Organize into groups good base body is it keep cauldron is it is
it raise to steam to go on to steam to enter to draw.
8. Is it raise products well produce after the cauldron breaking
the board off with the fingers and thumb by the board breaking off
with the fingers and thumb machine to steam.
9. Is it pile from finished product hoist or forklift to finished
product field pile the buttress according to specification to
10. Steaming and raising the car and side board and entering the
next board of circulation and returning after , the finished
product is unloaded, with upset hoist mould frame association that
drawing of patterns get off , restore 90 Degrees return to pour
mixer pour again after clearing up.